Feccuni Singapore Pte Ltd
No 10 Jalan Besar
# 05 - 01B Sim Lim Tower
Singaproe 208787

Phone: +65-63415256
Fax: +65-63415257
Email: info@feccuni.com

Non-Ferrous Products

Aluminimum

 

 

Ocean—MIXED UNSWEATED AUTO RADIATORS
Shall consist of mixed automobile radiators, to be free of aluminum
radiators, and iron finned radiators. All radiators to be subject to deduction
of actual iron. The tonnage specification should cover the
gross weight of the radiators, unless otherwise specified.
Pales—ADMIRALTY BRASS CONDENSER TUBES
Shall consist of clean sound Admiralty condenser tubing which
may be plated or unplated, free of nickel alloy, aluminum alloy, and
corroded material.
Pallu—ALUMINUM BRASS CONDENSER TUBES
Shall consist of clean sound condenser tubing which may be plated
or unplated, free of nickel alloy and corroded material.

Tablet—CLEAN ALUMINUM LITHOGRAPHIC SHEETS
To consist of 1000 and/or 3000 series alloys, to be free of paper,
plastic, excessively inked sheets, and any other contaminants.
Minimum size of 3" (8 cm) in any direction.

Tabloid—NEW, CLEAN ALUMINUM LITHOGRAPHIC SHEETS
To consist of 1000 and/or 3000 series alloys, uncoated, unpainted,
to be free of paper, plastic, ink, and any other contaminants. Minimum
size of 3" (8 cm) in any direction.

Taboo—MIXED LOW COPPER ALUMINUM CLIPPINGS AND SOLIDS
Shall consist of new, clean, uncoated and unpainted low copper
aluminum scrap of two or more alloys with a minimum thickness of
0.015 inches (.38 mm) and to be free of 2000 and 7000 series,
hair wire, wire screen, punchings less 1/2 inch (1.25 cm) diameter,
dirt, and other non-metallic items. Grease and oil not to total more
than 1%.Variations to this specification should be agreed upon prior
to shipment between the buyer and seller.

Taint/Tabor—CLEAN MIXED OLD ALLOY SHEET ALUMINUM
Shall consist of clean old alloy aluminum sheet of two or more alloys,
free of foil, venetian blinds, castings, hair wire, screen wire,
food or beverage containers, radiator shells, airplane sheet, bottle
caps, plastic, dirt, and other non-metallic items. Oil and grease not
to total more than 1%. Up to 10% Tale permitted.

Take—NEW ALUMINUM CAN STOCK
Shall consist of new low copper aluminum can stock and clippings,
clean, lithographed or not lithographed, and coated with clear lacquer
but free of lids with sealers, iron, dirt and other foreign contamination.
Oil not to exceed 1%.

Talc—POST-CONSUMER ALUMINUM CAN SCRAP
Shall consist of old aluminum food and/or beverage cans. The material
is to be free of other scrap metals, foil, tin cans, plastic bottles,
paper, glass, and other non-metallic items.Variations to this
specification should be agreed upon prior to shipment between the
buyer and seller.

Talcred—SHREDDED ALUMINUM USED BEVERAGE CAN (UBC)
SCRAP
Shall have a density of 12 to 17 pounds per cubic foot (193 to
273 kg/m3). Material should contain maximum 5% fines less than 4
mesh (U.S. standard screen size) (6.35 mm). Must be magnetically
separated material and free of steel, lead, bottle caps, plastic cans
and other plastics, glass, wood, dirt, grease, trash, and other foreign
substances. Any free lead is basis for rejection. Any and all
aluminum items, other than used beverage cans, are not acceptable.
Variations to this specification should be agreed upon prior to
shipment between the seller and buyer.

Taldack—DENSIFIED ALUMINUM USED BEVERAGE CAN
(UBC) SCRAP
Shall have a biscuit density of 35 to 50 pounds per cubic foot (562 to
802 kg/m3). Each biscuit not to exceed 60 pounds (27.2 kg). Nominal
biscuit size range from 10" to 13" x 101/4" (25.4 x 33 x 26 cm) to
20" x 61/4" x 9" (50.8 x 15.9 x 22.9 cm). Shall have banding slots in
both directions to facilitate bundle banding. All biscuits comprising a
bundle must be of uniform size. Size: Bundle range dimensions acceptable
are 41" to 44" x 51" (104 to 112 cm) to 54" x 54" (137 x 137
cm) to 56” (142 cm) high.The only acceptable tying method shall be
as follows: Using minimum 5/8" (1.6 cm) wide by .020" (.05 cm) thick
steel straps, the bundles are to be banded with one vertical band per
row and a minimum of two firth (horizontal) bands per bundle. Use of
skids and/or support sheets of any material is not acceptable. Must
be magnetically separated material and free of steel, lead, bottle
caps, plastic cans and other plastic, glass, wood, dirt, grease, trash,
and other foreign substances. Any free lead is basis for rejection.
Any and all aluminum items, other than used beverage cans, are not
acceptable. Items not covered in the specifications, including moisture,
and any variations to this specification should be agreed upon
prior to shipment between the seller and buyer.

Taldon—BALED ALUMINUM USED BEVERAGE CAN (UBC) SCRAP
Shall have a minimum density of 14 pounds per cubic foot (225
kg/m3), and a maximum density of 17 pounds per cubic foot (273
kg/m3) for unflattened UBC and 22 pounds per cubic foot (353
kg/m3) for flattened UBC. Size: Minimum 30 cubic feet (.85 m3),
with bale range dimensions of 24" to 40" (61 to 132 cm) by 30" to
52" (76 to 132 cm) by 40" to 84"(102 to 213 cm). The only acceptable
tying method shall be as follows: four to six 5/8" (1.6 cm) x .020"
(5 mm) steel bands, or six to ten #13 gauge steel wires (aluminum
bands or wires are acceptable in equivalent strength and number).
Use of skids and/or support sheets of any material is not acceptable.
Must be magnetically separated material and free of steel,
lead, bottle caps, plastic cans and other plastic, glass, wood, dirt,
grease, trash, and other foreign substances. Any free lead is basis
for rejection. Any and all aluminum items, other than used beverage
cans, are not acceptable.Variations to this specification should
be agreed upon prior to shipment between the buyer and seller.

Taldork—BRIQUETUED ALUMINUM USED BEVERAGE CAN (UBC)
SCRAP
Shall have a briquette density of 50 pounds per cubic foot (800
kg/m3) minimum. Nominal briquette size shall range from 12" to
24" (30.5 x 61 cm) x 12" to 24" (30.5 x 61 cm) in uniform profile
with a variable length of 8" (20.3 cm) minimum and 48" (122 cm)
maximum. Briquettes shall be bundled or stacked on skids and secured
with a minimum of one vertical band per row and a minimum
of one girth band per horizontal layer. Briquettes not to overhang
pallet.Total package height shall be 48 (122 cm) maximum. Banding
shall be at least 5/8" (1.6 cm) wide by .020" (5 mm) thick steel
strapping or equivalent strength.The weight of any bundle shall not
exceed 4,000 pounds (1.814 mt). Material must be magnetically
separated and free of steel, plastic, glass, dirt and all other foreign
substances.Any and all aluminum items other than UBC are unacceptable.
Any free lead is basis for rejection. Items not covered in
the specification, including moisture, and any variations to this
specification should be agreed upon prior to shipment between the
buyer and seller.

Tale—PAINTED SIDING
Shall consist of clean, low copper aluminum siding scrap, painted
one or two sides, free of plastic coating, iron, dirt, corrosion, fiber,
foam, or fiberglass backing or other non-metallic items.

Talk—ALUMINUM COPPER RADIATORS
Shall consist of clean aluminum and copper radiators, and/or aluminum
fins on copper tubing, free of brass tubing, iron and other
foreign contamination.

Tall—E.C. ALUMINUM NODULES
Shall consist of clean E.C. aluminum, chopped or shredded, free of
screening, hair-wire, iron, copper, insulation and other non-metallic
items. Must be free of minus 20 mesh material. Must contain
99.45% aluminum content.

Talon—NEW PURE ALUMINUM WIRE AND CABLE
Shall consist of new, clean, unalloyed aluminum wire or cable free
from hair wire, ACSR, wire screen, iron, insulation and other nonmetallic
items.

Tann—NEW MIXED ALUMINUM WIRE AND CABLE
Shall consist of new, clean unalloyed aluminum wire or cable which
may contain up to 10% 6000 series wire and cable free from hair
wire, wire screen, iron, insulation and other non-metallic items.

Taste—OLD PURE ALUMINUM WIRE AND CABLE
Shall consist of old, unalloyed aluminum wire and cable containing
not over 1% free oxide or dirt and free from hair wire, wire screen,
iron, insulation and other non-metallic items.

Tassel—OLD MIXED ALUMINUM WIRE AND CABLE
Shall consist of old, unalloyed aluminum wire and cable which may
contain up to 10% 6000 series wire and cable with not over 1%
free oxide or dirt and free from hair wire, wire screen, iron, insulation
and other non-metallic items.

Tarry A—CLEAN ALUMINUM PISTONS
Shall consist of clean aluminum pistons to be free from struts,
bushings, shafts, iron rings and non-metallic items. Oil and grease
not to exceed 2%.

Tarry B—CLEAN ALUMINUM PISTONS WITH STRUTS
Shall consist of clean whole aluminum pistons with struts. Material
is to be free from bushings, shafts, iron and non-metallic items . Oil
and grease not to exceed 2%.

Tarry C—IRONY ALUMINUM PISTONS
Shall consist of aluminum pistons with non-aluminum attachments
to be sold on a recovery basis or by special arrangement between
buyer and seller.

Teens—SEGREGATED ALUMINUM BORINGS AND TURNINGS
Shall consist of aluminum borings and turnings of one specified alloy.
Material should be free of oxidation, dirt, free iron, stainless
steel, magnesium, oil, flammable liquids, moisture and other nonmetallic
items. Fines should not exceed 3% through a 20 mesh
(U.S. standard) screen.

Telic—MIXED ALUMINUM BORINGS AND TURNINGS
Shall consist of clean, uncorroded aluminum borings and turnings
of two or more alloys and subject to deductions for fines in excess
of 3% through a 20 mesh screen and dirt, free iron, oil, moisture
and all other non-metallic items. Material containing iron in excess
of 10% and/or free magnesium or stainless steel or containing
highly flammable cutting compounds will not constitute good delivery.
To avoid dispute, material should be sold on basis of definite
maximum zinc, tin and magnesium content.

Tense—MIXED ALUMINUM CASTINGS
Shall consist of all clean aluminum castings which may contain auto
and airplane castings but no ingots, and to be free of iron, brass,
dirt and other non-metallic items. Oil and grease not to total more
than 2%.

Tepid—AIRCRAFT SHEET ALUMINUM
Should be sold on recovery basis or by special arrangements with
purchaser.

Terse—NEW ALUMINUM FOIL
Shall consist of clean, new, pure, uncoated 1000 and/or 3000
and/or 8000 series alloy aluminum foil, free from anodized foil,
radar foil and chaff, paper, plastics, or any other non-metallic items.
Hydraulically briquetted material and other alloys by agreement
between buyer and seller.

Tesla—POST CONSUMER ALUMINUM FOIL
Shall consist of baled old household aluminum foil and formed foil
containers of uncoated 1000, 3000 and 8000 series aluminum
alloy. Material may be anodized and contain a maximum of 5% organic
residue. Material must be free from radar chaff foil, chemically
etched foil, laminated foils, iron, paper, plastic and other nonmetallic
contaminants.

Tetra—NEW COATED ALUMINUM FOIL
Shall consist of new aluminum foil coated or laminated with ink,
lacquers, paper, or plastic. Material shall be clean, dry, free of
loose plastic, PVC and other non-metallic items. This foil is sold on
a metal content basis or by sample as agreed between buyer and
seller.

Thigh—ALUMINUM GRINDINGS
Should be sold on recovery basis or by special arrangements with
purchaser.

Thirl—ALUMINUM DROSSES, SPATTERS, SPILLINGS, SKIMMINGS
AND SWEEPINGS
Should be sold on recovery basis or by special arrangements with
purchaser.

Throb—SWEATED ALUMINUM
Shall consist of aluminum scrap which has been sweated or melted
into a form or shape such as an ingot, sow or slab for convenience
in shipping; to be free from corrosion, dross or any non-aluminum
inclusions. Should be sold subject to sample or analysis.

Tooth—SEGREGATED NEW ALUMINUM ALLOY CLIPPINGS AND
SOLIDS
Shall consist of new, clean, uncoated and unpainted aluminum
scrap of one specified aluminum alloy with a minimum thickness of
.015" (.38 mm) and to be free of hair wire, wire screen, dirt and
other non-metallic items. Oil and grease not to total more than 1%.
Also free from punchings less than 1/2" (1.27 cm) in size.

Tough—MIXED NEW ALUMINUM ALLOY CLIPPINGS AND SOLIDS
Shall consist of new, clean, uncoated and unpainted aluminum
scrap of two or more alloys with a minimum thickness of .015" (.38
mm) and to be free of hair wire, wire screen, dirt and other nonmetallic
items. Oil and grease not to total more than 1%. Also free
from punchings less than 1/2" (1.27 cm) in size.

Tread—SEGREGATED NEW ALUMINUM CASTINGS, FORGINGS AND
EXTRUSIONS
Shall consist of new, clean, uncoated aluminum castings, forgings,
and extrusions of one specified alloy only and to be free from sawings,
stainless steel, zinc, iron, dirt, oil, grease and other nonmetallic
items.

Troma – ALUMINUM AUTO OR TRUCK WHEELS
Shall consist of clean, single-piece, unplated aluminum wheels of
a single specified alloy, free of all inserts, steel, wheel weights,
valve stems, tires, grease and oil and other non-metallic items.
Variations to this specification should be agreed upon prior to shipment
between the buyer and seller.

Trump—ALUMINUM AUTO CASTINGS
Shall consist of all clean automobile aluminum castings of sufficient
size to be readily identified and to be free from iron, dirt,
brass, bushings, and non-metallic items. Oil and grease not to total
more than 2%.

Twang—INSULATED ALUMINUM WIRE SCRAP
Shall consist of aluminum wire scrap with various types of insulation.
To be sold on a sample or recovery basis, subject to arrangement
between buyer and seller.

Tweak—FRAGMENTIZER ALUMINUM SCRAP (from Automobile
Shredders)
Derived from either mechanical or hand separation, the material
must be dry and not contain more than 4% maximum free zinc,
1% maximum free magnesium, and 1.5% maximum of analytical
iron. Not to contain more than a total 5% maximum of nonmetallics,
of which no more than 1% shall be rubber and plastics.
To be free of excessively oxidized material, air bag canisters, or
any sealed or pressurized items. Any variation to be sold by special
arrangement between buyer and seller.

Twire—BURNT FRAGMENTIZER ALUMINUM SCRAP (from Automomobile
Shredders)
Incinerated or burned material must be dry and not contain more
than X% (% to be agreed upon by buyer and seller) ash from incineration,
4% maximum free zinc, 1% maximum free magnesium,
and 1.5% maximum of analytical iron. Not to contain more than a
total 5% maximum of non-metallics, of which no more than 1%
shall be rubber and plastics.To be free of excessively oxidized material,
air bag canisters, or any sealed pressurized items.Any variation
to be sold by special arrangement between buyer and seller.

Twist—ALUMINUM AIRPLANE CASTINGS
Shall consist of clean aluminum castings from airplanes and to be
free from iron, dirt, brass, bushings, and non-metallic items. Oil and
grease not to total more than 2%.

Twitch—FLOATED FRAGMENTIZER ALUMINUM SCRAP (from
Automobile Shredders)
Derived from wet or dry media separation device, the material
must be dry and not contain more than 1% maximum free zinc,
1% maximum free magnesium, and 1% maximum of analytical
iron. Not to contain more than a total 2% maximum of nonmetallics,
of which no more than 1% shall be rubber and plastics.
To be free of excessively oxidized material, air bag canisters, or
any sealed or pressurized items. Any variation to be sold by special
arrangement between buyer and seller.